Deur die roltipe lynkontakmetode word die lewensduur van die leispoor verleng. Ultrahoë rigiditeit kan akkuraatheid en las aansienlik verbeter
YGG-reeks lineêre leiweë word geklassifiseer in nie-verwisselbare en verwisselbare tipes Die groottes van hierdie twee tipes is dieselfde as mekaar. Die belangrikste verskil is dat die uitruilbare tipe blokke en relings vrylik uitgeruil kan word en hulle kan P-klas akkuraatheid handhaaf. As gevolg van streng dimensionele beheer, is die verwisselbare tipe lineêre quideways 'n wyse keuse vir kliënte wanneer relings nie vir 'n as gepas hoef te word nie. Die modelnommer van die YGG-reeks identifiseer die grootte, tipe, akkuraatheidsklas, voorlaaiklas, ens.
Nie-verwisselbare tipe kode:
| Nominale model | Blok tipe | Hoogte van samestelling Tipe | Dimensie | |
| Y | G: Standaard | R: Lae-samestelling | 15,20,25,30,35,45,55,65 | |
| L: Middel-Vergadering | ||||
| H: Hoë Vergadering | ||||
| Flens tipe | Lengte van Blok Aantal Blok Per Rail | Bykomstige kode | ||
| C: Met flens | N: Normaal | EX: 2 | Standaard (verwys asseblief na bladsy A26) | |
| R: Vierkantig | L: lank | |||
| Lengte van spoor | Akkuraatheidsgraad | voorbelading | Twee stelle per as | Spoor spesiale bewerking |
| Eenheid: mm | N: Normaal | ZF: Geringe klaring | II | U: Tapped-Hole Rail |
| H: Hoog | ZO: Geen vooraflaai nie | E: Spoor met spesiale bewerking | ||
| P: Presisie | Z1: Ligte Voorlaai | |||
| SP: Super-Presisie | Z2: Medium Voorlaai | |||
| UP: Ultra-Presisie | Z3: Swaar voorlading | |||
| Blokoppervlakbehandeling | Spoor Oppervlaktebehandeling | |||
| S: Standaard | S: Standaard | |||
| B1: Swart oksidasie | B1: Swart oksidasie | |||
| N1: Harde verchrooming | N1: Harde verchrooming | |||
| P: Fosfatering | P: Fosfatering | |||
| N3:Nikkelplaat | N3:Nikkelplaat | |||
| N4: Raydent | N4: Raydent | |||
| N5: Verchrooming | NS: Verchrooming | |||
| model | Komponent | Slider Afmetings | Vetnippel spesifikasie | ||||||||||||||
| H | H1 | N | W | B | B1 | C | L1 | L | K1 | K2 | G | MXL | T | H2 | H3 | ||
| YGG20R | 34 | 5 | 12 | 44 | 32 | 6 | 36 | 57.5 | 86 | 15.8 | 6 | 5.3 | M5XB | 8 | 8.3 | 8.3 | G-M6 |
| YGG20LR | 50 | 77.5 | 106 | 18.8 | |||||||||||||
| YGG25R | 40 | 5.5 | 12.5 | 48 | 35 | 6.5 | 35 | 64.5 | 97.9 | 20.75 | 7.25 | 12 | M6X8 | 9.5 | 10.2 | 10 | G-M6 |
| YGG25LR | 50 | 81 | 114.4 | 21.5 | |||||||||||||
| YGG30R | 45 | 6 | 16 | 60 | 40 | 10 | 40 | 71 | 109.8 | 23.5 | 8 | 12 | MBX10 | 9.5 | 9.5 | 10.3 | G-M6 |
| YGG30LR | 60 | 93 | 131.8 | 24.5 | |||||||||||||
| YGG35R | 55 | 6.5 | 18 | 70 | 50 | 10 | 50 | 79 | 124 | 22.5 | 10 | 12 | MBX12 | 12 | 16 | 19.6 | G-M6 |
| YGG35LR | 72 | 106.5 | 151.5 | 25.5 | |||||||||||||
| YGG45R | 70 | 8 | 20.5 | 86 | 60 | 13 | 60 | 106 | 153.2 | 31 | 10 | 12.9 | M10X17 | 16 | 20 | 24 | G-PT1/8 |
| YGG45LR | 80 | 139.8 | 187 | 37.9 | |||||||||||||
| YGG55R | 80 | 10 | 23.5 | 100 | 75 | 12.5 | 75 | 125.5 | 183.7 | 37.75 | 12.5 | 12.9 | M12X18 | 17.5 | 22 | 27.5 | G-PT1/8 |
| YGG55LR | 95 | 173.8 | 232 | 51.9 | |||||||||||||
| YGG65R | 90 | 12 | 31.5 | 126 | 76 | 25 | 70 | 160 | 232 | 60.8 | 15.8 | 12.9 | M16X20 | 25 | 15 | 15 | G-PT1/8 |
| YGG65LR | 120 | 223 | 295 | 67.3 | |||||||||||||
| model | Spoorafmetings (mm) | Spanbout van die spoor | Basiese vraggradering | Toelaat statiese wringkrag | gewig | ||||||||||
| WR | Ha | D | h | d | P | E | (Mm) | C(CN) | Co(KN) | MNR KN-m | LP KN-m | MY KN-m | Blok (kg) | Spoor (kg/m) | |
| YGG20R | 20 | 21 | 9.5 | 8.5 | 6 | 30 | 20 | M5X20 | 21.3 | 46.7 | 0.647 | 0.46 | 0.46 | 0.44 | 2.76 |
| YGG20LR | 26.9 | 63 | 0.872 | 0.837 | 0.837 | 0.62 | |||||||||
| YGG25R | 23 | 23.6 | 11 | 9 | 7 | 30 | 20 | M6X20 | 27.7 | 57.1 | 0.758 | 0.605 | 0.605 | 0.67 | 3.08 |
| YGG25LR | 33.9 | 73.4 | 0.975 | 0.991 | 0.991 | 0.86 | |||||||||
| YGG30R | 28 | 28 | 14 | 12 | 9 | 40 | 20 | M8X25 | 39.1 | 82.1 | 1.445 | 1.06 | 1.06 | 1.06 | 4.41 |
| YGG30LR | 48.1 | 105 | 1.846 | 1.712 | 1.712 | 1.42 | |||||||||
| YGG35R | 34 | 30.2 | 14 | 12 | 9 | 40 | 20 | M8X25 | 57.9 | 105.2 | 2.17 | 1.44 | 1.44 | 1.61 | 6.06 |
| YGG35LR | 73.1 | 142 | 2.93 | 2.6 | 2.6 | 2.21 | |||||||||
| YGG45R | 45 | 38 | 20 | 17 | 14 | 52.5 | 22.5 | M12X35 | 92.6 | 178.8 | 4.52 | 3.05 | 3.05 | 3.22 | 9.97 |
| YGG45LR | 116 | 230.9 | 6.33 | 5.47 | 5.47 | 4.41 | |||||||||
| YGG55R | 53 | 44 | 23 | 20 | 16 | 60 | 30 | M14X45 | 130.5 | 252 | 8.01 | 5.4 | 5.4 | 5.18 | 13.98 |
| YGG55LR | 167.8 | 348 | 11.15 | 10.25 | 10.25 | 7.34 | |||||||||
| YGG65R | 63 | 53 | 26 | 22 | 18 | 75 | 35 | M16X50 | 213 | 411.6 | 16.2 | 11.59 | 11.59 | 11.04 | 20.22 |
| YGG65LR | 275.3 | 572.7 | 22.55 | 22.17 | 22.17 | 15.75 | |||||||||
| model | Komponent | Slider Afmetings | Vetnippel spesifikasie | ||||||||||||||||
| H | H1 | N | W | B | B1 | C | C1 | L1 | L | K1 | K2 | G | M | T | T1 | H2 | H3 | ||
| YGG20C | 30 | 5 | 21.5 | 63 | 53 | 5 | 40 | 35 | 57.5 | 86 | 13.8 | 6 | 5.3 | M6 | 8 | 10 | 4.3 | 4.3 | G-M6 |
| YGG20LC | 77.5 | 106 | 12.8 | ||||||||||||||||
| YGG25C | 36 | 5.5 | 23.5 | 70 | 57 | 6.5 | 45 | 40 | 64.5 | 97.9 | 15.75 | 7.25 | 12 | M8 | 9.5 | 10 | 6.2 | 6 | G-M6 |
| YGG25LC | 81 | 114.4 | 24 | ||||||||||||||||
| YGG30C | 42 | 6 | 31 | 90 | 72 | 9 | 52 | 44 | 71 | 109.8 | 17.5 | 8 | 12 | M10 | 9.5 | 10 | 6.5 | 7.3 | G-M6 |
| YGG30LC | 93 | 131.8 | 28.5 | ||||||||||||||||
| YGG35C | 48 | 6.5 | 33 | 100 | 82 | 9 | 62 | 52 | 79 | 124 | 16.5 | 10 | 12 | M10 | 12 | 13 | 9 | 12.6 | G-M6 |
| YGG35LC | 106.5 | 151.5 | 30.25 | ||||||||||||||||
| YGG45C | 60 | 8 | 37.5 | 120 | 100 | 10 | 80 | 60 | 106 | 153.2 | 21 | 10 | 12.9 | M12 | 14 | 15 | 10 | 14 | G-PT1/8 |
| YGG45LC | 139.8 | 187 | 37.9 | ||||||||||||||||
| YGG55C | 70 | 10 | 43.5 | 140 | 116 | 12 | 95 | 70 | 125.5 | 183.7 | 27.75 | 12.5 | 12.9 | M14 | 16 | 17 | 12 | 17.5 | G-PT1/8 |
| YGG55LC | 173.8 | 232 | 51.9 | ||||||||||||||||
| YGG65C | 90 | 12 | 53.5 | 170 | 142 | 14 | 110 | 82 | 160 | 232 | 40.8 | 15.8 | 12.9 | M16 | 22 | 23 | 15 | 15 | G-PT1/8 |
| YGG65LC | 223 | 295 | 72.3 | ||||||||||||||||
| model | Spoorafmetings (mm) | Spanbout van die spoor | Basiese vraggradering | Toelaat statiese wringkrag | gewig | ||||||||||
| WR | HR | D | h | d | P | E | (Mm) | C(KN) | Co(KN) | KN-m | KN-m | MY KN-m | Blok (kg) | Spoor (kg/m) | |
| YGG20C | 20 | 21 | 9.5 | 8.5 | 6 | 30 | 20 | M5X20 | 21.3 | 46.7 | 0.647 | 0.46 | 0.46 | 0.44 | 2.76 |
| YGG20LC | 26.9 | 63 | 0.872 | 0.837 | 0.837 | 0.62 | |||||||||
| YGG25C | 23 | 23.6 | 11 | 9 | 7 | 30 | 20 | M6X20 | 27.7 | 57.1 | 0.758 | 0.605 | 0.605 | 0.67 | 3.08 |
| YGG25LC | 33.9 | 73.4 | 0.975 | 0.991 | 0.991 | 0.86 | |||||||||
| YGG30C | 28 | 28 | 14 | 12 | 9 | 40 | 20 | M8X25 | 39.1 | 82.1 | 1.445 | 1.06 | 1.06 | 1.06 | 4.41 |
| YGG30LC | 48.1 | 105 | 1.846 | 1.712 | 1.712 | 1.42 | |||||||||
| YGG35C | 34 | 30.2 | 14 | 12 | 9 | 40 | 20 | M8X25 | 57.9 | 105.2 | 2.17 | 1.44 | 1.44 | 1.61 | 6.06 |
| 73.1 | 142 | 2.93 | 2.6 | 2.6 | 2.21 | ||||||||||
| YGG35LC | |||||||||||||||
| YGG45C | 45 | 38 | 20 | 17 | 14 | 52.5 | 22.5 | M12X35 | 92.6 | 178.8 | 4.52 | 3.05 | 3.05 | 3.22 | 9.97 |
| YGG45LC | 116 | 230.9 | 6.33 | 5.47 | 5.47 | 4.41 | |||||||||
| YGG55C YGG55LC | 53 | 44 | 23 | 20 | 16 | 60 | 30 | M14X45 | 130.5 167.8 | 252 348 | 8.01 11.15 | 5.4 10.25 | 5.4 10.25 | 5.18 7.34 | 13.98 |
| YGG65C | 63 | 53 | 26 | 22 | 18 | 75 | 35 | M16X50 | 213 | 411.6 | 16.2 | 11.59 | 11.59 | 11.04 | 20.22 |
| YGG65LC | 275.3 | 572.7 | 22.55 | 22.17 | 22.17 | 15.75 | |||||||||
Teken in op ons nuusbrief vir daaglikse nuus en opdaterings
Sjanghai, China
YOSOmasjinerie
Kopiereg © Jingpeng Machinery & Equipment(Shanghai) Co., Ltd. Alle regte voorbehou
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
