Tríd an modh teagmhála líne cineál sorcóir, leathnaítear saol seirbhíse an iarnróid treorach. Is féidir le rigidity ultra-ard feabhas mór a chur ar chruinneas agus ar ualach
Rangaítear treoracha líneacha sraith YGG i gcineálacha neamh-idirmhalartaithe agus idirmhalartaitheTá méideanna an dá chineál seo mar a chéile. Is é an príomh-difríocht ná gur féidir an cineál idir-inathraithe de bhloic agus ráillí a mhalartú go saor agus is féidir leo cruinneas P-aicme a choinneáil. Mar gheall ar rialú dian tríthoiseach, is rogha ciallmhar do chustaiméirí na bealaí líneacha cineál idirmhalartaithe nuair nach gá ráillí a mheaitseáil le haghaidh ais, Aithníonn uimhir mhúnla sraith theYGG méid, cineál, rang cruinnis, rang réamh-ualach, etc.
Cód Cineál neamh-inmhalartaithe:
| Múnla Ainmniúil | Cineál Bloc | Airde Cineál Tionóil | toise | |
| Y | G: Caighdeán | R: Comhthionól Íseal | 15,20,25,30,35,45,55,65 | |
| L: An Meán-Chomhthionól | ||||
| H:Ard-Chomhthionól | ||||
| Cineál flange | Fad an Bhloic Líon na mBloc in aghaidh an Iarnróid | Cód Cúlpháirtí | ||
| C: Le Flange | N: Gnáth | EX:2 | Caighdeán (Féach leathanach A26, le do thoil) | |
| R: Cearnóg | L: Fada | |||
| Fad an Iarnróid | Grád Cruinneas | Réamhluchtú | Dhá Thacar in aghaidh na hAise | Meaisínithe Speisialta Iarnróid |
| Aonad: mm | N: Gnáth | ZF: Imréiteach Beag | II | U:Iarnród Tapped-Hole |
| H: Ard | ZO: Gan Réamhlódáil | E: Iarnród le Meaisínithe Speisialta | ||
| P: Beachtas | Z1: Réamhlódáil Éadrom | |||
| SP: Sár-chruinneas | Z2: Réamhluchtú Meánach | |||
| UP: Ultra-Beachtais | Z3: Réamhluchtú Trom | |||
| Bloc Cóireála Dromchla | Cóireáil Dromchla Iarnróid | |||
| S:Caighdeánach | S:Caighdeánach | |||
| B1: Ocsaídiú Dubh | B1: Ocsaídiú Dubh | |||
| N1: Plating Chrome crua | N1: Plating Chrome Crua | |||
| P: fosfatáil | P: fosfatáil | |||
| N3: Plátáil Nicil | N3: Plátáil Nicil | |||
| N4: Raydent | N4: Raydent | |||
| N5: Chrome Plating | NS: Chrome Plating | |||
| Múnla | Comhpháirt | Toisí Sleamhnáin | Sonraíocht Nipple ramhar | ||||||||||||||
| H | H1 | N | W | B | B1 | C | L1 | L | K1 | K2 | G | MXL | T | H2 | H3 | ||
| YGG20R | 34 | 5 | 12 | 44 | 32 | 6 | 36 | 57.5 | 86 | 15.8 | 6 | 5.3 | M5XB | 8 | 8.3 | 8.3 | G-M6 |
| YGG20LR | 50 | 77.5 | 106 | 18.8 | |||||||||||||
| YGG25R | 40 | 5.5 | 12.5 | 48 | 35 | 6.5 | 35 | 64.5 | 97.9 | 20.75 | 7.25 | 12 | M6X8 | 9.5 | 10.2 | 10 | G-M6 |
| YGG25LR | 50 | 81 | 114.4 | 21.5 | |||||||||||||
| YGG30R | 45 | 6 | 16 | 60 | 40 | 10 | 40 | 71 | 109.8 | 23.5 | 8 | 12 | MBX10 | 9.5 | 9.5 | 10.3 | G-M6 |
| YGG30LR | 60 | 93 | 131.8 | 24.5 | |||||||||||||
| YGG35R | 55 | 6.5 | 18 | 70 | 50 | 10 | 50 | 79 | 124 | 22.5 | 10 | 12 | MBX12 | 12 | 16 | 19.6 | G-M6 |
| YGG35LR | 72 | 106.5 | 151.5 | 25.5 | |||||||||||||
| YGG45R | 70 | 8 | 20.5 | 86 | 60 | 13 | 60 | 106 | 153.2 | 31 | 10 | 12.9 | M10X17 | 16 | 20 | 24 | G- PT1/8 |
| YGG45LR | 80 | 139.8 | 187 | 37.9 | |||||||||||||
| YGG55R | 80 | 10 | 23.5 | 100 | 75 | 12.5 | 75 | 125.5 | 183.7 | 37.75 | 12.5 | 12.9 | M12X18 | 17.5 | 22 | 27.5 | G- PT1/8 |
| YGG55LR | 95 | 173.8 | 232 | 51.9 | |||||||||||||
| YGG65R | 90 | 12 | 31.5 | 126 | 76 | 25 | 70 | 160 | 232 | 60.8 | 15.8 | 12.9 | M16X20 | 25 | 15 | 15 | G- PT1/8 |
| YGG65LR | 120 | 223 | 295 | 67.3 | |||||||||||||
| Múnla | Toisí Iarnróid(mm) | Bolt Iarnróid a Dhianú | Bunrang Rátála | Casmhóiminte Statach Ceadaigh | meáchan | ||||||||||
| WR | Ha | D | h | d | P | E | (Mm) | C(CN) | Co(KN) | MR KN-m | MP KN-m | MO KN-m | Bloc(kg) | Iarnród(kg/m) | |
| YGG20R | 20 | 21 | 9.5 | 8.5 | 6 | 30 | 20 | M5X20 | 21.3 | 46.7 | 0.647 | 0.46 | 0.46 | 0.44 | 2.76 |
| YGG20LR | 26.9 | 63 | 0.872 | 0.837 | 0.837 | 0.62 | |||||||||
| YGG25R | 23 | 23.6 | 11 | 9 | 7 | 30 | 20 | M6X20 | 27.7 | 57.1 | 0.758 | 0.605 | 0.605 | 0.67 | 3.08 |
| YGG25LR | 33.9 | 73.4 | 0.975 | 0.991 | 0.991 | 0.86 | |||||||||
| YGG30R | 28 | 28 | 14 | 12 | 9 | 40 | 20 | M8X25 | 39.1 | 82.1 | 1.445 | 1.06 | 1.06 | 1.06 | 4.41 |
| YGG30LR | 48.1 | 105 | 1.846 | 1.712 | 1.712 | 1.42 | |||||||||
| YGG35R | 34 | 30.2 | 14 | 12 | 9 | 40 | 20 | M8X25 | 57.9 | 105.2 | 2.17 | 1.44 | 1.44 | 1.61 | 6.06 |
| YGG35LR | 73.1 | 142 | 2.93 | 2.6 | 2.6 | 2.21 | |||||||||
| YGG45R | 45 | 38 | 20 | 17 | 14 | 52.5 | 22.5 | M12X35 | 92.6 | 178.8 | 4.52 | 3.05 | 3.05 | 3.22 | 9.97 |
| YGG45LR | 116 | 230.9 | 6.33 | 5.47 | 5.47 | 4.41 | |||||||||
| YGG55R | 53 | 44 | 23 | 20 | 16 | 60 | 30 | M14X45 | 130.5 | 252 | 8.01 | 5.4 | 5.4 | 5.18 | 13.98 |
| YGG55LR | 167.8 | 348 | 11.15 | 10.25 | 10.25 | 7.34 | |||||||||
| YGG65R | 63 | 53 | 26 | 22 | 18 | 75 | 35 | M16X50 | 213 | 411.6 | 16.2 | 11.59 | 11.59 | 11.04 | 20.22 |
| YGG65LR | 275.3 | 572.7 | 22.55 | 22.17 | 22.17 | 15.75 | |||||||||
| Múnla | Comhpháirt | Toisí Sleamhnáin | Sonraíocht Nipple ramhar | ||||||||||||||||
| H | H1 | N | W | B | B1 | C | C1 | L1 | L | K1 | K2 | G | M | T | T1 | H2 | H3 | ||
| YGG20C | 30 | 5 | 21.5 | 63 | 53 | 5 | 40 | 35 | 57.5 | 86 | 13.8 | 6 | 5.3 | M6 | 8 | 10 | 4.3 | 4.3 | G-M6 |
| YGG20LC | 77.5 | 106 | 12.8 | ||||||||||||||||
| YGG25C | 36 | 5.5 | 23.5 | 70 | 57 | 6.5 | 45 | 40 | 64.5 | 97.9 | 15.75 | 7.25 | 12 | M8 | 9.5 | 10 | 6.2 | 6 | G-M6 |
| YGG25LC | 81 | 114.4 | 24 | ||||||||||||||||
| YGG30C | 42 | 6 | 31 | 90 | 72 | 9 | 52 | 44 | 71 | 109.8 | 17.5 | 8 | 12 | M10 | 9.5 | 10 | 6.5 | 7.3 | G-M6 |
| YGG30LC | 93 | 131.8 | 28.5 | ||||||||||||||||
| YGG35C | 48 | 6.5 | 33 | 100 | 82 | 9 | 62 | 52 | 79 | 124 | 16.5 | 10 | 12 | M10 | 12 | 13 | 9 | 12.6 | G-M6 |
| YGG35LC | 106.5 | 151.5 | 30.25 | ||||||||||||||||
| YGG45C | 60 | 8 | 37.5 | 120 | 100 | 10 | 80 | 60 | 106 | 153.2 | 21 | 10 | 12.9 | M12 | 14 | 15 | 10 | 14 | G- PT1/8 |
| YGG45LC | 139.8 | 187 | 37.9 | ||||||||||||||||
| YGG55C | 70 | 10 | 43.5 | 140 | 116 | 12 | 95 | 70 | 125.5 | 183.7 | 27.75 | 12.5 | 12.9 | M14 | 16 | 17 | 12 | 17.5 | G- PT1/8 |
| YGG55LC | 173.8 | 232 | 51.9 | ||||||||||||||||
| YGG65C | 90 | 12 | 53.5 | 170 | 142 | 14 | 110 | 82 | 160 | 232 | 40.8 | 15.8 | 12.9 | M16 | 22 | 23 | 15 | 15 | G- PT1/8 |
| YGG65LC | 223 | 295 | 72.3 | ||||||||||||||||
| Múnla | Toisí Iarnróid(mm) | Bolt Iarnróid a Dhianú | Bunrang Rátála | Casmhóiminte Statach Ceadaigh | meáchan | ||||||||||
| WR | HR | D | h | d | P | E | (Mm) | C(KN) | Co(KN) | KN-m | KN-m | MO KN-m | Bloc(kg) | Iarnród(kg/m) | |
| YGG20C | 20 | 21 | 9.5 | 8.5 | 6 | 30 | 20 | M5X20 | 21.3 | 46.7 | 0.647 | 0.46 | 0.46 | 0.44 | 2.76 |
| YGG20LC | 26.9 | 63 | 0.872 | 0.837 | 0.837 | 0.62 | |||||||||
| YGG25C | 23 | 23.6 | 11 | 9 | 7 | 30 | 20 | M6X20 | 27.7 | 57.1 | 0.758 | 0.605 | 0.605 | 0.67 | 3.08 |
| YGG25LC | 33.9 | 73.4 | 0.975 | 0.991 | 0.991 | 0.86 | |||||||||
| YGG30C | 28 | 28 | 14 | 12 | 9 | 40 | 20 | M8X25 | 39.1 | 82.1 | 1.445 | 1.06 | 1.06 | 1.06 | 4.41 |
| YGG30LC | 48.1 | 105 | 1.846 | 1.712 | 1.712 | 1.42 | |||||||||
| YGG35C | 34 | 30.2 | 14 | 12 | 9 | 40 | 20 | M8X25 | 57.9 | 105.2 | 2.17 | 1.44 | 1.44 | 1.61 | 6.06 |
| 73.1 | 142 | 2.93 | 2.6 | 2.6 | 2.21 | ||||||||||
| YGG35LC | |||||||||||||||
| YGG45C | 45 | 38 | 20 | 17 | 14 | 52.5 | 22.5 | M12X35 | 92.6 | 178.8 | 4.52 | 3.05 | 3.05 | 3.22 | 9.97 |
| YGG45LC | 116 | 230.9 | 6.33 | 5.47 | 5.47 | 4.41 | |||||||||
| YGG55C YGG55LC | 53 | 44 | 23 | 20 | 16 | 60 | 30 | M14X45 | 130.5 | 252 | 8.01 | 5.4 | 5.4 | 5.18 | 13.98 |
| YGG65C | 63 | 53 | 26 | 22 | 18 | 75 | 35 | M16X50 | 213 | 411.6 | 16.2 | 11.59 | 11.59 | 11.04 | 20.22 |
| YGG65LC | 275.3 | 572.7 | 22.55 | 22.17 | 22.17 | 15.75 | |||||||||
Liostáil lenár nuachtlitir le haghaidh nuashonruithe nua agus nuashonruithe laethúla
Shanghai, An tSín
Innealra YOSO
Cóipcheart © Innealra & Trealamh Jingpeng (Shanghai) Co, Teo Gach ceart ar cosaint
EN
AR
BG
CS
DA
NL
FI
FR
DE
EL
HI
IT
JA
KO
NO
PL
PT
RU
ES
SV
TL
ID
UK
VI
HU
TH
TR
FA
AF
MS
SW
GA
CY
BE
KA
LA
MY
TG
UZ
